Geely Emgrand (EC718, EC718RV, EC715, EC715RV) - Workshop Manual - Repair Manual

GEELY EMGRAND (2009) - WORKSHOP, SERVICE, REPAIR MANUAL

- English Workshop Manual / Repair Manual, to vehicles Geely Emgrand (EC718, EC718RV, EC715, EC715RV).
 

INDEX:

1 VEHICLE OVERVIEW
1.1 Warnings and Notices
- 1.1.1 Description and Operation
- 1.1.1.1 Warnings and Notices
1.2 Vehicle Inspection
- 1.2.1 Description and Operation
- 1.2.1.1 Inspection Items Before Operating The Vehicle
- 1.2.1.2 Inspection Items Before Each Time Filling Fuel
- 1.2.1.3 Monthly Inspection Items
- 1.2.1.4 Inspection Items At Least Twice A Year
- 1.2.1.5 Inspection Items When Changing Engine Oil
- 1.2.1.6 Inspection Items At Least Once A Year
1.3 Lifting and Jacking the Vehicle
- 1.3.1 Description and Operation
- 1.3.1.1 Lifting and Jacking the Vehicle
1.4 Maintenance
- 1.4.1 Specifications
- 1.4.1.1 Oil and Fluid Capacity
- 1.4.1.2 Recommended Oil and Lubricants
- 1.4.2 Description and Operation
- 1.4.2.1 Oil Maintenance Schedule
- 1.4.2.2 Normal Driving Condition Service Schedule
- 1.4.2.3 Harsh Driving Condition Service Schedule
- 1.4.2.4 Regular Service Instructions
- 1.4.2.5 Tire Rotation Description
1.5 Service Information System
- 1.5.1 Description and Operation
- 1.5.1.1 Abbreviations Used In This Manual
- 1.5.1.2 Arrows and Symbols Description
1.6 Health and Safety
- 1.6.1 Description and Operation
- 1.6.1.1 Description
- 1.6.1.2 Acid and Alkali
- 1.6.1.3 Airbag
- 1.6.1.4 Air-Conditioning Refrigerant
- 1.6.1.5 Adhesives and Sealants
- 1.6.1.6 Engine Coolant
- 1.6.1.7 Asbestos
- 1.6.1.8 Battery Acid Fluid
- 1.6.1.9 Brake Fluid
- 1.6.1.10 Chemical Materials
- 1.6.1.11 Dust
- 1.6.1.12 Electrical Shock
- 1.6.1.13 Exhaust
- 1.6.1.14 Fiber Isolation
- 1.6.1.15 Fire
- 1.6.1.16 First Aid
- 1.6.1.17 Foam - Polyurethane
- 1.6.1.18 Fuel
- 1.6.1.19 Gas Cylinder
- 1.6.1.20 General Workshop Tools and Equipment
- 1.6.1.21 Lubricants and Grease
- 1.6.1.22 Noise
1.7 Standards and Metrics
- 1.7.1 Description and Operation
- 1.7.1.1 Equivalent - Decimal and Metric
- 1.7.1.2 US English/Metric Units Conversion
1.8 Vehicle Specifications
- 1.8.1 Specifications
- 1.8.1.1 Body Size
- 1.8.1.2 Fastener Specifications
1.9 Vehicle Identification Number
- 1.9.1 Description and Operation
- 1.9.1.1 Vehicle Identification
- 1.9.1.2 Vehicle Identification Number (VIN) Description
- 1.9.1.3 Compliance Label
- 1.9.1.4 Tire Placard
- 1.9.1.5 Engine Serial Number and its Location
- 1.9.1.6 Manual Transmission Serial Number and its Location
1.10 Noise, Vibration and Abnormal Sound
- 1.10.1 Description and Operation
- 1.10.1.1 Diagnostic Information and Procedures
- 1.10.1.2 Repair
1.11 Water Leaks
- 1.11.1 Description and Operation
- 1.11.1.1 Diagnostic Information and Procedures
- 1.11.1.2 Repair
1.12 Special Tools
- 1.12.1 Special Tools and Equipment
- 1.12.1.1 Power Train Special Tools
- 1.12.1.2 Chassis and Body Special Tools
PART TWO POWER SYSTEM
2 Engine
- 2.1 Warnings and Notices
- 2.1.1 Warnings and Notices
- 2.2 Control System JL4G18-D
- 2.2.1 Specifications
- 2.2.1.1 Fastener Tightening Specifications
- 2.2.1.2 Temperature Sensor Temperature and Resistance Correlation
- 2.2.1.3 Altitude and Atmospheric Pressure Correlation
- 2.2.1.4 Intake Air Pressure Sensor Voltage and Pressure Diagram
- 2.2.2 Description and Operation
- 2.2.2.1 Overview
- 2.2.2.2 Input Components
- 2.2.2.3 Output Components
- 2.2.3 System Working Principle
- 2.2.3.1 System Working Principle
- 2.2.3.2 Fuel Injection Quantity Adjustment
- 2.2.3.3 Fault Self-Diagnostic and Protection Function
- 2.2.4 Component Locator
- 2.2.4.1 Fuel Injector, Idle Speed Control Valve and VVT Solenoid Valve
- 2.2.4.2 Throttle Position Sensor, Engine Coolant Temperature Sensor, Canister Solenoid Valve and Intake Air Pressure and Temperature Sensor
- 2.2.5 Disassemble View
- 2.2.5.1 Throttle Body Assembly
- 2.2.6 Schematic
- 2.2.6.1 Schematic
- 2.2.7 Diagnostic Information and Procedures
- 2.2.7.1 Diagnostic Description
- 2.2.7.2 Control System Check
- 2.2.7.3 Intermittent Fault Check
- 2.2.7.4 Fault Symptom Table
- 2.2.7.5 ECM Connector Terminal Table
- 2.2.7.6 DTC Code Type Definition
- 2.2.7.7 DTC Code (DTC) list
- 2.2.7.8 DTC Fail-Safe Table
- 2.2.7.9 Data Stream List
- 2.2.7.10 Action Test Table
- 2.2.7.11 DTC Code Index
- 2.2.7.12 DTC P0010 P2088 P2089
- 2.2.7.13 DTC P000A P0012
- 2.2.7.14 DTC P0016
- 2.2.7.15 DTC P0030 P0031 P0032 P0053
- 2.2.7.16 DTC P0036 P0037 P0038 P0054
- 2.2.7.17 DTC P0105 P0106 P0107 P0108
- 2.2.7.18 DTC P0112 P0113
- 2.2.7.19 DTC P0117 P0118
- 2.2.7.20 DTC P0122 P0123
- 2.2.7.21 DTC P0130 P0131 P0132 P0133 P0134 P2195 P2196
- 2.2.7.22 DTC P0136 P0137 P0138 P0140 P2270 P2271
- 2.2.7.23 DTC P0170 P0171 P0172 P2177 P2178 P2187 P2188
- 2.2.7.24 DTC P0201 P0261 P0262
- 2.2.7.25 DTC P0202 P0264 P0265
- 2.2.7.26 DTC P0203 P0267 P0268
- 2.2.7.27 DTC P0204 P0270 P0271
- 2.2.7.28 DTC P0300-P0304
- 2.2.7.29 DTC P0321 P0322
- 2.2.7.30 DTC P0327 P0328
- 2.2.7.31 DTC P0340-P0343
- 2.2.7.32 DTC P0420
- 2.2.7.33 DTC P0444 P0458 P0459
- 2.2.7.34 DTC P0480 P0481 P0691 P0692 P0693 P0694
- 2.2.7.35 DTC P0501
- 2.2.7.36 DTC P0506-P0509 P0511
- 2.2.7.37 DTC P0560 P0562 P0563
- 2.2.7.38 DTC P0602
- 2.2.7.39 DTC P0627 P0628 P0629
- 2.2.7.40 DTC P0645-P0647
- 2.2.7.41 DTC P0650
- 2.2.7.42 DTC P1610-P1614
- 2.2.7.43 DTC P1523 U0001 U0121 U0140 U0151
- 2.2.7.44 Engine Fault Lamp (MIL)/Check Vehicle Lamp Malfunction
- 2.2.7.45 Crankshaft rotates, but the engine can not start.
- 2.2.7.46 Idle Speed Reading Procedure
- 2.2.8 Removal and Installation
- 2.2.8.1 Idle Air Control Valve Replacement
- 2.2.8.2 Fuel Injector Replacement
- 2.2.8.3 Throttle Position Sensor Replacement
- 2.2.8.4 VVT Solenoid Valve Replacement and Filter Cleaning
- 2.2.8.5 VVT Solenoid Valve Cleaning
- 2.2.8.6 Engine Coolant Temperature Sensor Replacement
- 2.2.8.7 Intake Air Pressure and Temperature Sensor Replacement
- 2.2.8.8 Engine Control Module Replacement
- 2.3 Fuel System JL4G18-D
- 2.3.1 Specifications
- 2.3.1.1 Fastener Tightening Specifications
- 2.3.2 Description and Operation
- 2.3.2.1 Description and Operation
- 2.3.3 System Working Principle
- 2.3.3.1 System Working Principle
- 2.3.4 Component Locator
- 2.3.4.1 Fuel Filler
- 2.3.4.2 Fuel Supply System
- 2.3.4.3 Fuel Tank Assembly
- 2.3.4.4 Fuel Pump Assembly
- 2.3.4.5 Fuel Injectors
- 2.3.5 Disassemble View
- 2.3.5.1 Disassemble View
- 2.3.6 Schematic
- 2.3.6.1 Schematic
- 2.3.7 Diagnostic Information and Procedures
- 2.3.7.1 Diagnostic Descriptions
- 2.3.7.2 Visual Inspection
- 2.3.7.3 Fuel Pump Inoperative
- 2.3.7.4 All Fuel Injectors Inoperative
- 2.3.7.5 Fuel Gage Inaccurate
- 2.3.7.6 Surge diagnostic
- 2.3.7.7 Fuel Pressure Testing Procedure
- 2.3.8 Removal and Installation
- 2.3.8.1 Fuel Pressure Release Procedure
- 2.3.8.2 Fuel Filter Replacement
- 2.3.8.3 Fuel Pump Assembly Replacement
- 2.3.8.4 Fuel Level Sensor Replacement
- 2.4 Auxiliary Emission Control JL4G18-D
- 2.4.1 Specifications
- 2.4.1.1 Fastener Tightening Specifications
- 2.4.2 Description and Operation
- 2.4.2.1 Heated Oxygen Sensor (HO2S)
- 2.4.2.2 Evaporative Emission Control System
- 2.4.2.3 Purged Crankcase Ventilation (PCV) System
- 2.4.3 System Working Principle
- 2.4.3.1 Heated Type Oxygen Sensor Working Principle
- 2.4.3.2 Canister Solenoid Valve Working Principle
- 2.4.4 Component Locator
- 2.4.4.1 Canister Location
- 2.4.4.2 Canister Solenoid Valve Location
- 2.4.5 Schematic
- 2.4.5.1 Schematic
- 2.4.6 Diagnostic Information and Procedures
- 2.4.6.1 Diagnostic Description
- 2.4.6.2 Visual Inspection
- 2.4.6.3 Canister Solenoid Valve Inoperative
- 2.4.6.4 Crankcase Ventilation (PCV) System Check / Diagnostic
- 2.4.7 Removal and Installation
- 2.4.7.1 Post-Catalytic Oxygen Sensor Replacement
- 2.4.7.2 Pre-Catalytic Oxygen Sensor Replacement
- 2.4.7.3 Canister Solenoid Valve Replacement
- 2.5 Engine Anti-theft System JL4G18-D
- 2.5.1 Specifications
- 2.5.1.1 Fastener Tightening Specifications
- 2.5.2 Description and Operation
- 2.5.2.1 Description and Operation
- 2.5.3 System Working Principle
- 2.5.3.1 System Working Principle
- 2.5.4 Component Locator
- 2.5.4.1 Component Locator
- 2.5.5 Disassemble View
- 2.5.5.1 Disassemble View
- 2.5.6 Schematic
- 2.5.6.1 Schematic
- 2.5.7 Diagnostic Information and Procedures
- 2.5.7.1 Diagnosis Description
- 2.5.7.2 Visual Inspection
- 2.5.7.3 Anti-theft Engine Control Module Connector List
- 2.5.7.4 DTC code (DTC) list
- 2.5.7.5 Data Flow Table
- 2.5.7.6 Fault Symptom Table
- 2.5.7.7 Replaced Key Programming
- 2.5.7.8 Ignition Key Erase
- 2.5.7.9 Replaced Security Module Programming
- 2.5.7.10 Replaced ECM Programming
- 2.5.7.11 Replaced Anti-theft Module and ECM Programming
- 2.5.7.12 Engine Anti-theft Warning Lamp Flashing, Vehicle Can Not Start
- 2.5.8 Removal and Installation
- 2.5.8.1 EAS Coil Replacement
- 2.5.8.2 Anti-theft System Control Module Replacement
- 2.6 Engine Mechanical System JL4G18-D
- 2.6.1 Specifications
- 2.6.1.1 Fastener Tightening Specifications
- 2.6.1.2 Mechanical System Specification
- 2.6.1.3 Intake and Exhaust Valves Lifter Specifications Table
- 2.6.1.4 Intake and Exhaust Valves Lifter Selection Table
- 2.6.2 Description and Operation
- 2.6.2.1 Description and Operation
- 2.6.3 System Working Principle
- 2.6.3.1 System Working Principle
- 2.6.4 Component Locator
- 2.6.4.1 Component Locator
- 2.6.5 Disassemble View
- 2.6.5.1 Cylinder Head Covers
- 2.6.5.2 Camshaft and Accessories
- 2.6.5.3 Cylinder Head
- 2.6.5.4 Cylinder Block
- 2.6.6 Schematic
- 2.6.6.1 Schematic
- 2.6.7 Diagnostic Information and Procedures
- 2.6.7.1 Diagnosis Description
- 2.6.7.2 Visual Inspection
- 2.6.7.3 Comprehensive Engine Inspections
- 2.6.7.4 Engine Noise Diagnosis
- 2.6.7.5 Noisy when there is engine load
- 2.6.7.6 Slight vibration when engine is warming up.
- 2.6.7.7 Vibration at idle and when engine is warming up
- 2.6.7.8 Misfire Accompanied By Abnormal Engine Noise
- 2.6.7.9 Drive Belt Inspection
- 2.6.7.10 Drive Belt Chirp Sound Diagnostic
- 2.6.7.11 Drive Belt Scream Diagnostic
- 2.6.7.12 Drive Belt Hum Sound Diagnostic
- 2.6.7.13 Drive Belt Off Diagnostics
- 2.6.7.14 Drive Belt Excessive Wear
- 2.6.8 Removal and Installation
- 2.6.8.1 Plastic Engine Shield Replacement
- 2.6.8.2 Cylinder Head Cover Replacement
- 2.6.8.3 Drive Belt Replacement
- 2.6.8.4 Drive Belt Tensioner Replacement
- 2.6.8.5 Throttle Body Assembly Replacement
- 2.6.8.6 Intake Manifold Assembly Replacement
- 2.6.8.7 Engine Mount Replacement
- 2.6.8.8 Timing Chain Tensioner Replacement
- 2.6.8.9 Timing Chain Cover Replacement
- 2.6.8.10 Timing Chain Replacement
- 2.6.8.11 Timing Chain Inspection
- 2.6.8.12 Camshaft Replacement
- 2.6.8.13 Engine Replacement
- 2.6.8.14 Cylinder Head Assembly Replacement
- 2.6.8.15 Cylinder Head Assembly Removal and Installation
- 2.6.8.16 Piston Connecting Rod and Bearing Replacement
- 2.6.8.17 Flywheel Replacement
- 2.6.8.18 Crankshaft Replacement
- 2.6.8.19 Piston Rod Disassemble, Assemble and Inspection
- 2.6.8.20 Valve Clearance Adjustments
- 2.6.8.21 Crankshaft Front Oil Seal Replacement
- 2.6.8.22 Crankshaft Rear Oil Seal Replacement
- 2.6.9 Special Tools and Equipment
- 2.6.9.1 Special Tools List
- 2.7 Exhaust System JL4G18-D
- 2.7.1 Specifications
- 2.7.1.1 Fastener Tightening Specifications
- 2.7.2 Description and Operation
- 2.7.2.1 Exhaust Manifold
- 2.7.2.2 Three-Way Catalytic Converter
- 2.7.3 System Working Principle
- 2.7.3.1 System Working Principle
- 2.7.4 Component Locator
- 2.7.4.1 Exhaust
- 2.7.4.2 Three-Way Catalytic Converter Assembly
- 2.7.4.3 Front Muffler Assembly
- 2.7.4.4 Rear Muffler Assembly
- 2.7.4.5 Front Exhaust Insulation Panel
- 2.7.4.6 Front Muffler Heat Shield
- 2.7.5 Diagnostic Information and Procedures
- 2.7.5.1 Diagnostic Description
- 2.7.5.2 Visual Inspection
- 2.7.5.3 Exhaust System Blockage
- 2.7.5.4 Exhaust System Leakage
- 2.7.5.5 Exhaust System Noise
- 2.7.5.6 Exhaust System Repair Notes
- 2.7.6 Removal and Installation
- 2.7.6.1 Exhaust Manifold Replacement
- 2.7.6.2 Three-way Catalytic Converter Replacement
- 2.7.6.3 Front Muffler Replacement
- 2.7.6.4 Rear Muffler Replacement
- 2.8 Cooling System JL4G18-D
- 2.8.1 Specifications
- 2.8.1.1 Fastener Tightening Specifications
- 2.8.1.2 Cooling System Specifications
- 2.8.2 Description and Operation
- 2.8.2.1 Description and Operation
- 2.8.3 System Working Principle
- 2.8.3.1 System Working Principle
- 2.8.4 Component Locator
- 2.8.4.1 Component Locator
- 2.8.5 Disassemble View
- 2.8.5.1 Disassemble View
- 2.8.6 Schematic
- 2.8.6.1 Schematic
- 2.8.7 Diagnostic Information and Procedures
- 2.8.7.1 Diagnosis Description
- 2.8.7.2 Cooling Fan Circuit Diagnosis
- 2.8.7.3 High-Speed Cooling Fan Does Not Run
- 2.8.7.4 Low-Speed Cooling Fan Does Not Run
- 2.8.7.5 Cooling Fan Always Runs At Low Speed
- 2.8.7.6 Cooling Fan Always Runs At High Speed
- 2.8.7.7 Thermostat Diagnostic
- 2.8.7.8 Engine Overheating
- 2.8.7.9 Engine Does Not Reach Normal Operating Temperature
- 2.8.7.10 Excessive Engine Coolant Loss
- 2.8.8 Removal and Installation
- 2.8.8.1 Engine Coolant Discharge and Filling
- 2.8.8.2 Coolant Recovery Reservoir Replacement
- 2.8.8.3 Cooling Fan Replacement
- 2.8.8.4 Thermostat Replacement
- 2.8.8.5 Radiator Replacement
- 2.8.8.6 Water Pump Replacement
- 2.9 Lubricating System JL4G18-D
- 2.9.1 Specifications
- 2.9.1.1 Fastener Tightening Specifications
- 2.9.1.2 Oil Pump Specifications
- 2.9.2 Description and Operation
- 2.9.2.1 Description and Operation
- 2.9.3 System Working Principle
- 2.9.3.1 Lubrication Schematic
- 2.9.3.2 Engine Oil Pressure Sensor Plug Control Principle
- 2.9.4 Component Locator
- 2.9.4.1 Component Locator
- 2.9.5 Disassemble View
- 2.9.5.1 Disassemble View
- 2.9.6 Schematic
- 2.9.6.1 Schematic
- 2.9.7 Diagnostic Information and Procedures
- 2.9.7.1 Diagnosis Description
- 2.9.7.2 Visual Inspection
- 2.9.7.3 Abnormal Engine Oil Consumption Diagnostic
- 2.9.7.4 Engine Oil Pressure Diagnostic and Test
- 2.9.7.5 Engine Oil Leak Diagnostic
- 2.9.8 Removal and Installation
- 2.9.8.1 Oil Pump Replacement
- 2.9.8.2 Oil Pump Cleaning and Inspection
- 2.9.8.3 Oil Pan Replacement
- 2.10 Ignition System JL4G18-D
- 2.10.1 Specifications
- 2.10.1.1 Fastener Tightening Specifications
- 2.10.1.2 Ignition System Specification
- 2.10.2 Description and Operation
- 2.10.2.1 Description and Operation
- 2.10.3 System Working Principle
- 2.10.3.1 System Working Principle
- 2.10.4 Component Locator
- 2.10.4.1 Component Locator
- 2.10.5 Disassemble View
- 2.10.5.1 Ignition Cylinder Assembly Disassemble View
- 2.10.6 Schematic
- 2.10.6.1 Schematic
- 2.10.7 Diagnostic Information and Procedures
- 2.10.7.1 Diagnosis Description
- 2.10.7.2 Visual Inspection
- 2.10.7.3 Check Ignition Switch
- 2.10.7.4 Ignition Relay IG1 No Power Output
- 2.10.7.5 Spark Plug Does Not Arcing
- 2.10.7.6 Spark Plug Diagnostic
- 2.10.7.7 Common Spark Plug Malfunction
- 2.10.8 Removal and Installation
- 2.10.8.1 Camshaft Position Sensor Replacement
- 2.10.8.2 Crankshaft Position Sensor Replacement
- 2.10.8.3 Ignition Coil Replacement
- 2.10.8.4 Spark Plug Replacement
- 2.10.8.5 Knock Sensor Replacement
- 2.11 Starting / Charging System JL4G18-D
- 2.11.1 Specifications
- 2.11.1.1 Fastener Tightening Specifications
- 2.11.1.2 General Specifications
- 2.11.2 Description and Operation
- 2.11.2.1 Battery Description and Operation
- 2.11.2.2 Starting System Description and Operation
- 2.11.2.3 Charging System Description and Operation
- 2.11.3 System Working Principle
- 2.11.3.1 Starting System Working Principle
- 2.11.3.2 Charging System Working Principle
- 2.11.4 Component Locator
- 2.11.4.1 Generator and Starter
- 2.11.5 Disassemble View
- 2.11.5.1 Starter Disassemble View
- 2.11.5.2 Generator Disassemble View
- 2.11.6 Schematic
- 2.11.6.1 Schematic
- 2.11.7 Diagnostic Information and Procedures
- 2.11.7.1 Diagnosis Description
- 2.11.7.2 Visual Inspection
- 2.11.7.3 Starter Can Not Stop
- 2.11.7.4 Engine Can Not Start
- 2.11.7.5 Start Motor Noise Diagnostic
- 2.11.7.6 Charging Indicator Always On
- 2.11.7.7 Charging Indicator Always Off
- 2.11.7.8 Generator Noise Diagnosis
- 2.11.7.9 Battery Discharging Current Parasitic Load Test
- 2.11.7.10 Jump Start Procedure
- 2.11.8 Removal and Installation
- 2.11.8.1 Battery Disconnection
- 2.11.8.2 Battery Replacement
- 2.11.8.3 Generator Replacement
- 2.11.8.4 Starter Replacement
- 2.12 Control System JL4G15-D
- 2.12.1 Specifications
- 2.12.1.1 Fastener Tightening Specifications
- 2.12.1.2 Intake Air Temperature Sensor Non-Load Resistance Temperature Characteristics Table
- 2.12.1.3 Intake Air Pressure Sensor Output Voltage and Pressure Relationship
- 2.12.2 Description and Operation
- 2.12.2.1 Overview
- 2.12.2.2 Components Descriptions
- 2.12.3 System Working Principle
- 2.12.3.1 Electronic Throttle Body (ETC) Working Principle
- 2.12.3.2 ECM Controlled Fuel Supply System
- 2.12.3.3 ECM Controlled Ignition System
- 2.12.3.4 Electronic Throttle Body Function Restrictions
- 2.12.3.5 Idle Speed Control
- 2.12.3.6 Knock Control
- 2.12.3.7 Air-Conditioning Switch Off Control
- 2.12.3.8 Canister Solenoid Valve Control
- 2.12.3.9 Fault Self-diagnosis and Protection Function
- 2.12.4 Component Locator
- 2.12.4.1 Component Locator
- 2.12.5 Disassemble View
- 2.12.5.1 Disassemble View
- 2.12.6 Schematic
- 2.12.6.1 Schematic
- 2.12.7 Diagnostic Information and Procedures
- 2.12.7.1 Diagnosis Description
- 2.12.7.2 Control System Check
- 2.12.7.3 Intermittent Fault Check
- 2.12.7.4 Symptoms Table
- 2.12.7.5 ECM Terminal List
- 2.12.7.6 DTC Code Type Definition
- 2.12.7.7 DTC Code (DTC) List
- 2.12.7.8 DTC Fail-Safe List
- 2.12.7.9 Data Stream List
- 2.12.7.10 Action Test Table
- 2.12.7.11 Crankshaft Position Sensor (CKP) Learn
- 2.12.7.12 Electronic Throttle Body (ETC) Check
- 2.12.7.13 Acceleration Pedal Position Sensor (APP) Check
- 2.12.7.14 DTC Code Index
- 2.12.7.15 DTC P0011 P0012 P0016 P0026
- 2.12.7.16 DTC P0068 P0106
- 2.12.7.17 DTC P0076 P0077
- 2.12.7.18 DTC P0107 P0108
- 2.12.7.19 DTC P0112 P0113
- 2.12.7.20 DTC P0117 P0118
- 2.12.7.21 DTC P0122 P0123
- 2.12.7.22 DTC P0131 P0132 P0133 P0134
- 2.12.7.23 DTC P0135
- 2.12.7.24 DTC P0137 P0138 P0140
- 2.12.7.25 DTC P0141
- 2.12.7.26 DTC P0171 P0172 P1167 P1171 P2187 P2188
- 2.12.7.27 DTC P0222 P0223
- 2.12.7.28 DTC P0230
- 2.12.7.29 DTC P0261 P0262
- 2.12.7.30 DTC P0264 P0265
- 2.12.7.31 DTC P0267 P0268
- 2.12.7.32 DTC P0270 P0271
- 2.12.7.33 DTC P0300
- 2.12.7.34 DTC P0324 P0325
- 2.12.7.35 DTC P0335 P0336
- 2.12.7.36 DTC P0340 P0341
- 2.12.7.37 DTC P0351 P0352
- 2.12.7.38 DTC P0420
- 2.12.7.39 DTC P0458 P0459
- 2.12.7.40 DTC P0480 P0481
- 2.12.7.41 DTC P0502
- 2.12.7.42 DTC P0506 P0507
- 2.12.7.43 DTC P0562 P0563
- 2.12.7.44 DTC P0571
- 2.12.7.45 DTC P0601 P0602 P0604 P0606 P060A P1516 P2101
- 2.12.7.46 DTC P0641 P0651
- 2.12.7.47 DTC P0646 P0647
- 2.12.7.48 DTC P0650
- 2.12.7.49 DTC P0685
- 2.12.7.50 DTC P2104 P2105 P2106 P2110
- 2.12.7.51 DTC P2119
- 2.12.7.52 DTC P2122 P2123
- 2.12.7.53 DTC P2127 P2128
- 2.12.7.54 DTC P2135
- 2.12.7.55 DTC P2138
- 2.12.7.56 DTC P2610
- 2.12.7.57 DTC P0633 U0167 U0426
- 2.12.7.58 Crankshaft Rotation Normal, But The Engine Can Not Start
- 2.12.7.59 Electronic Throttle Body (ETC) Adaptive Learn Program
- 2.12.8 Removal and Installation
- 2.12.8.1 Acceleration Pedal Replacement
- 2.13 Fuel System JL4G15-D
- 2.13.1 4G15-D Fuel System Overview
- 2.13.1 Diagnostic Information and Procedures
- 2.13.1.1 Fuel Pump Inoperative
- 2.13.1.2 All Fuel Injectors Inoperative
- 2.13.2 Removal and Installation
- 2.13.2.1 Fuel Injector Replacement
- 2.14 Auxiliary Emission Control JL4G15-D
- 2.14.1 4G15-D auxiliary emission control devices, an overview
- 2.14.1 Component Locator
- 2.14.1.1 Component Locator
- 2.14.2 Diagnostic Information and Procedures
- 2.14.2.1 Canister Solenoid Valve Inoperative
- 2.15 Engine Anti-theft System JL4G15-D
- 2.15.1 4G15-D Engine Anti-theft System Overview
- 2.15.1 Diagnostic Information and Procedures
- 2.15.1.1 Engine Anti-theft System Warning Lamp Flashing, The Vehicle Can Not Be Started
- 2.16 Engine Mechanical Systems JL4G15-D
- 2.16.1 4G15-D Engine Mechanical System Overview
- 2.16.1 Specifications
- 2.16.1.1 Fastener Tightening Specifications
- 2.16.1.2 Mechanical System Specifications
- 2.16.1.3 Intake and Exhaust Valves Lifter Specifications Table
- 2.16.1.4 Intake and Exhaust Valves Lifter Selection Table
- 2.16.2 System Working Principle
- 2.16.2.1 System Working Principle
- 2.16.3 Removal and Installation
- 2.16.3.1 4G15-D Mechanical Parts Disassemble Instructions
- 2.16.3.2 Electronic Throttle Body Replacement
- 2.17 Exhaust System JL4G15-D
- 2.17.1 4G15-D Engine Exhaust System Overview
- 2.17.1 Specifications
- 2.17.1.1 Fastener Tightening Specifications
- 2.18 Engine Cooling System JL4G15-D
- 2.18.1 4G15-D Engine Cooling System Overview
- 2.18.1 Specifications
- 2.18.1.1 Cooling System Specifications
- 2.18.2 Schematic
- 2.18.2.1 Schematic
- 2.18.3 Diagnostic Information and Procedures
- 2.18.3.1 Cooling Fan Circuit Diagnosis
- 2.18.3.2 High Speed Cooling Fan Inoperative
- 2.18.3.3 Low Speed Cooling Fan Inoperative
- 2.18.3.4 Cooling Fan Always Runs At Low-Speed
- 2.18.3.5 Cooling Fan Always Runs At High Speed
- 2.19 Lubrication System JL4G15-D
- 2.19.1 4G15-D Engine Lubrication System Overview
- 2.19.1 Specifications
- 2.19.1.1 Oil Pump Specifications
- 2.20 Ignition System JL4G15-D
- 2.20.1 4G15-D Engine Ignition System Overview
- 2.20.1 Specifications
- 2.20.1.1 Ignition System Specification
- 2.20.2 Component Locator
- 2.20.2.1 Component Locator
- 2.20.3 Schematic
- 2.20.3.1 Schematic
- 2.20.4 Diagnostic Information and Procedures
- 2.20.4.1 Spark Plug No Arcing
- 2.20.5 Removal and Installation
- 2.20.5.1 Camshaft Position Sensor Replacement
- 2.20.5.2 Ignition Coil Replacement
- 2.20.5.3 High-voltage Damping Line Replacement
- 2.21 Starting / Charging System JL4G15-D
- 2.21.1 4G15-D Engine Starting / Charging System Overview
- 2.21.1 Specifications
- 2.21.1.1 Starter Motor Specifications
- 2.21.1.2 Generator Specifications
3 Transmission / Drive Axle
- 3.1 Warnings and Notices
- 3.1.1 Warnings and Notices
- 3.2 Clutch System
- 3.2.1 Specifications
- 3.2.1.1 Fastener Tightening Specifications
- 3.2.1.2 General Specifications
- 3.2.2 Description and Operation
- 3.2.2.1 Description and Operation
- 3.2.3 System Working Principle
- 3.2.3.1 System Working Principle
- 3.2.4 Disassemble View
- 3.2.4.1 Disassemble View
- 3.2.5 Diagnostic Information and Procedures
- 3.2.5.1 Diagnosis Description
- 3.2.5.2 Clutch Inseparable Malfunction (Gearshift Lever Can Not Select Gear)
- 3.2.5.3 Clutch Slipping
- 3.2.5.4 Clutch Pedal Hard to Push
- 3.2.5.5 Clutch Pedal Does Not Return
- 3.2.5.6 Clutch Bearings Noisy When Release
- 3.2.6 Removal and Installation
- 3.2.6.1 Clutch Pedal Replacement
- 3.2.6.2 Clutch Master Cylinder Replacement
- 3.2.6.3 Hydraulic Clutch Bleeding
- 3.2.6.4 Clutch Pedal Free Travel Adjustment
- 3.2.6.5 Clutch Assembly Replacement
- 3.2.6.6 Clutch Pilot Bearing Replacement
- 3.2.6.7 Clutch Slave Cylinder Replacement
- 3.2.7 Special Tools and Equipment
- 3.2.7.1 Special Tools List
- 3.3 Manual Transmission
- 3.3.1 Specifications
- 3.3.1.1 Fastener Tightening Specifications
- 3.3.1.2 Manual Transmission Specifications
- 3.3.2 Description and Operation
- 3.3.2.1 Transmission System Operation
- 3.3.3 System Working Principle
- 3.3.3.1 Shifting Working Principle
- 3.3.3.2 Vehicle Speed Sensor Working Principle
- 3.3.3.3 Reverse Switch Working Principle
- 3.3.4 Component Locator
- 3.3.4.1 Transmission Assembly Location
- 3.3.4.2 Vehicle Speed Sensor, Reverse Switch Location
- 3.3.5 Disassemble View
- 3.3.5.1 Gear Components and Gear Box Disassemble View
- 3.3.5.2 Control Mechanism, Fork Component Disassemble View
- 3.3.6 Schematic
- 3.3.6.1 Reverse Switch, Vehicle Speed Sensor Circuit Schematic
- 3.3.7 Diagnostic Information and Procedures
- 3.3.7.1 Diagnosis Description
- 3.3.7.2 Visual Inspection
- 3.3.7.3 Hard to Shift
- 3.3.7.4 Jumping Out Of Gear
- 3.3.7.5 Hard to Disengage
- 3.3.7.6 Abnormal Sound When Running
- 3.3.8 Removal and Installation
- 3.3.8.1 Transmission Fluid Level Inspection
- 3.3.8.2 Vehicle Speed Sensor Replacement
- 3.3.8.3 Transmission Assembly Replacement
- 3.3.8.4 Shift Control Assembly Replacement
- 3.3.8.5 Shift Control Assembly Disassemble and Assemble
- 3.3.8.6 Shift Shaft Replacement
- 3.3.8.7 Input Shaft Disassemble and Assemble
- 3.3.8.8 Main shaft Disassemble and Assemble
- 3.3.8.9 Shift Lever Replacement
- 3.3.8.10 Transmission Input Shaft Oil Seal Replacement
- 3.3.9 Special Tools and Equipment
- 3.3.9.1 Special Tools List
PART THREE CHASSIS
4 Suspension System
- 4.1 Warnings and Notices
- 4.1.1 Warnings and Notices
- 4.2 Front Suspension
- 4.2.1 Specifications
- 4.2.1.1 Fastener Tightening Specifications
- 4.2.1.2 General Specifications
- 4.2.2 Description and Operation
- 4.2.2.1 Description and Operation
- 4.2.3 System Working Principle
- 4.2.3.1 Suspension System Terms
- 4.2.3.2 Suspension System Component Working Principle
- 4.2.4 Component Locator
- 4.2.4.1 Component Locator
- 4.2.5 Disassemble View
- 4.2.5.1 Disassemble View
- 4.2.6 Diagnostic Information and Procedures
- 4.2.6.1 Diagnosis Description
- 4.2.6.2 Shock Absorber Inspection
- 4.2.6.3 Ball Pin and Steering Knuckle Inspection
- 4.2.6.4 Ball Stud Inspection
- 4.2.6.5 Friction Too Great Inspection
- 4.2.6.6 Ride Diagnostic (Too Soft or Hard)
- 4.2.6.7 Body Tilt or Sway When Cornering
- 4.2.6.8 Noise Diagnostics
- 4.2.6.9 Vehicle Front End Height Abnormal
- 4.2.7 Removal and Installation
- 4.2.7.1 Lower Control Arm Replacement
- 4.2.7.2 Lower Control Arm Bushing Replacement
- 4.2.7.3 Front Strut Assembly Replacement
- 4.2.7.4 Front Shock Absorber Components and Spring Replacement
- 4.2.7.5 Stabilizer Bar Replacement
- 4.2.7.6 Stabilizer Bar Link Replacement
- 4.2.7.7 Lower Control Arm Ball Joint Replacement
- 4.2.7.8 Steering Knuckle Replacement
- 4.2.7.9 Front Wheel Hub Replacement
- 4.2.8 Special Tools and Equipment
- 4.2.8.1 Special Tool List
- 4.3 Rear Suspension
- 4.3.1 Specifications
- 4.3.1.1 Fastener Tightening Specifications
- 4.3.2 Description and Operation
- 4.3.2.1 Description and Operation
- 4.3.3 System Working Principle
- 4.3.3.1 System Working Principle
- 4.3.4 Component Locator
- 4.3.4.1 Component Locator
- 4.3.5 Disassemble View
- 4.3.5.1 Disassemble View
- 4.3.6 Diagnostic Information and Procedures
- 4.3.6.1 Diagnostic Information and Procedures
- 4.3.7 Removal and Installation
- 4.3.7.1 Rear Strut Assembly Replacement
- 4.3.7.2 Rear Shock Absorber Component and Spring Replacement
- 4.3.7.3 Rear Axle Assembly Replacement
- 4.3.7.4 Rear Stabilizer Bar Replacement
- 4.3.7.5 Rear Wheel Hub Replacement
- 4.3.7.6 Rear Axle Sleeve Replacement
- 4.3.8 Special Tools and Equipment
- 4.3.8.1 Special Tool List
- 4.4 Wheels and Tires
- 4.4.1 Specifications
- 4.4.1.1 Fastener Tightening Specifications
- 4.4.1.2 Tire Specifications
- 4.4.1.3 Front Suspension Positioning Specifications
- 4.4.1.4 Rear Suspension Positioning Specifications
- 4.4.2 Description and Operation
- 4.4.2.1 Tire Structure
- 4.4.2.2 Tire Sidewall Mark Meaning and the Pressure Instructions
- 4.4.2.3 Tire Transposition
- 4.4.3 System Working Principle
- 4.4.3.1 Wheel Alignment
- 4.4.4 Diagnostic Information and Procedures
- 4.4.4.1 Diagnosis Description
- 4.4.4.2 Visual Inspection
- 4.4.4.3 Initial Inspection Before Tire Positioning
- 4.4.4.4 Wheel Bearing Diagnostic
- 4.4.4.5 Wheel Vibration Diagnostic
- 4.4.4.6 Wheels Run Out Inspection
- 4.4.4.7 Tire Abnormal Wear Diagnostic
- 4.4.4.8 Excessive Tire Wear Diagnostic
- 4.4.4.9 Vehicle Waddle Diagnostic
- 4.4.4.10 Tire Wear Indicator
- 4.4.4.11 Radial Tire Deviation Correction
- 4.4.5 Removal and Installation
- 4.4.5.1 Wheel Replacement
- 4.4.5.2 Front Toe Adjustment
5 Transmission / Axle
- 5.1 Warnings and Notices
- 5.1.1 Warnings and Notices
- 5.2 Differential
- 5.2.1 Specifications
- 5.2.1.1 Fastener Tightening Specifications
- 5.2.2 Disassemble View
- 5.2.2.1 Disassemble View
- 5.2.3 Diagnostic Information and Procedures
- 5.2.3.1 Fault Symptom Table
- 5.2.4 Removal and Installation
- 5.2.4.1 Differential Disassemble and Assemble
- 5.3 Drive Shaft System
- 5.3.1 Specifications
- 5.3.1.1 Fastener Tightening Specifications
- 5.3.2 Disassemble View
- 5.3.2.1 Disassemble View
- 5.3.3 Diagnostic Information and Procedures
- 5.3.3.1 Fault Symptom Table
- 5.3.4 Removal and Installation
- 5.3.4.1 Drive Shaft Replacement
- 5.3.4.2 Drive Shaft Oil Seal Replacement
- 5.3.5 Special Tools and Equipment
- 5.3.5.1 Special Tool List
6 Brake System
- 6.1 Warnings and Notices
- 6.1.1 Warnings and Notices
- 6.2 Front Brake
- 6.2.1 Specifications
- 6.2.1.1 Fastener Tightening Specifications
- 6.2.1.2 Front Disc Brake Parts Specifications
- 6.2.2 Description and Operation
- 6.2.2.1 Description and Operation
- 6.2.3 Disassemble View
- 6.2.3.1 Disassemble View
- 6.2.4 Diagnostic Information and Procedures
- 6.2.4.1 Brake Pad Inspection
- 6.2.4.2 Brake Caliper Inspection
- 6.2.4.3 Brake Guide Inspection
- 6.2.4.4 Floating Brake Caliper Pin Inspection
- 6.2.4.5 Brake Disc Surface and Worn Inspection
- 6.2.4.6 Brake Disc Thickness Measurement
- 6.2.4.7 Brake Disc Assembly Rear Face Run Out Measurement
- 6.2.5 Removal and Installation
- 6.2.5.1 Brake Pad Replacement - Front
- 6.2.5.2 Brake Caliper Replacement - Front
- 6.2.5.3 Brake Disc Replacement
- 6.2.5.4 Disc Brake Dust Cover Replacement
- 6.3 Rear Brake
- 6.3.1 Specifications
- 6.3.1.1 Fastener Tightening Specifications
- 6.3.1.2 Rear Disc Brake Parts Specifications
- 6.3.2 Description and Operation
- 6.3.2.1 Description and Operation
- 6.3.3 Disassemble View
- 6.3.3.1 Disassemble View
- 6.3.4 Diagnostic Information and Procedures
- 6.3.4.1 Diagnostic Information and Procedures
- 6.3.5 Removal and Installation
- 6.3.5.1 Brake Pad Replacement - Rear
- 6.3.5.2 Brake Caliper Replacement - Rear
- 6.3.5.3 Brake Disc Replacement - Rear
- 6.4 Hydraulic Brake
- 6.4.1 Specifications
- 6.4.1.1 Fastener Tightening Specifications
- 6.4.2 Description and Operation
- 6.4.2.1 Description and Operation
- 6.4.3 Component Locator
- 6.4.3.1 Component Locator
- 6.4.4 Diagnostic Information and Procedures
- 6.4.4.1 Diagnostic Notes
- 6.4.4.2 Fault Symptom Table
- 6.4.4.3 Brake Warning Lamp Always On
- 6.4.5 Removal and Installation
- 6.4.5.1 Brake Master Cylinder Tank Replacement
- 6.4.5.2 Brake Master Cylinder Replacement
- 6.4.5.3 Brake Hose Replacement (Front)
- 6.4.5.4 Brake Hose Replacement (Rear)
- 6.4.5.5 Hydraulic Brake System Exhaust Procedure
- 6.4.5.6 Vacuum Booster Replacement
- 6.4.5.7 Brake Fluid Level Sensor Replacement
- 6.4.5.8 Brake Pedal Replacement
- 6.5 Parking System
- 6.5.1 Specifications
- 6.5.1.1 Fastener Tightening Specifications
- 6.5.2 Description and Operation
- 6.5.2.1 Description and Operation
- 6.5.3 Component Locator
- 6.5.3.1 Component Locator
- 6.5.4 Diagnostic Information and Procedures
- 6.5.4.1 Fault Symptom Table
- 6.5.4.2 Park Brake Warning Lamp Malfunction
- 6.5.5 Removal and Installation
- 6.5.5.1 Park Brake Control Mechanism Switch Replacement
- 6.5.5.2 Park Brake Control Mechanism Assembly Replacement
- 6.5.5.3 Park Brake Control Mechanism Cable Assembly Replacement
- 6.5.5.4 Park Brake Control Mechanism Adjustment
- 6.6 ABS / TCS / EBD / ESP
- 6.6.1 Specifications
- 6.6.1.1 Fastener Tightening Specifications
- 6.6.1.2 Wheel Speed Sensor Technical Specifications
- 6.6.2 Description and Operation
- 6.6.2.1 Description and Operation
- 6.6.3 System Working Principle
- 6.6.3.1 System Working Principle
- 6.6.4 Component Locator
- 6.6.4.1 Component Locator
- 6.6.5 Schematic
- 6.6.5.1 Schematic
- 6.6.6 Diagnostic Information and Procedures
- 6.6.6.1 Diagnosis Description
- 6.6.6.2 Visual Inspection
- 6.6.6.3 DTC Code (DTC) List
- 6.6.6.4 Scan Tool and The Vehicle Can Not Communicate
- 6.6.6.5 Fault Symptom Table
- 6.6.6.6 Active Test and Data Flow
- 6.6.6.7 ABS Control Module Terminal List
- 6.6.6.8 ABS Warning Lamp Always On
- 6.6.6.9 ABS Warning Lamp Always Off
- 6.6.6.10 Power Failure and Hydraulic Electronic Control Unit Assembly Internal Fault Diagnosis
- 6.6.6.11 Wheel Speed Sensor Fault Diagnosis
- 6.6.7 Removal and Installation
- 6.6.7.1 Hydraulic Electronic Control Unit Replacement
- 6.6.7.2 Wheel Speed Sensor Replacement (Front)
- 6.6.7.3 Wheel Speed Sensor Replacement (Rear)
- 6.7 TPMS
- 6.7.1 Specifications
- 6.7.1.1 Fastener Tightening Specifications
- 6.7.1.2 Sensor Specifications
- 6.7.2 Description and Operation
- 6.7.2.1 Tire Pressure Monitoring System Overview
- 6.7.2.2 The Composition Of Tire Pressure Monitoring System
- 6.7.3 System Working Principle
- 6.7.3.1 System Working Principle
- 6.7.4 Component Locator
- 6.7.4.1 Component Locator
- 6.7.5 Schematic
- 6.7.5.1 Schematic
- 6.7.6 Diagnostic Information and Procedures
- 6.7.6.1 Sensor Learn
- 6.7.6.2 TPMS Control Module Terminal List
- 6.7.6.3 DTC Code (DTC) List
- 6.7.6.4 Tire Pressure Monitoring System (TPMS) Indicator Always On
- 6.7.7 Removal and Installation
- 6.7.7.1 TPMS Control Unit Replacement
- 6.7.7.2 TPMS Sensor Replacement
- 6.7.8 Special Tools and Equipment
- 6.7.8.1 Trigger Tool
7 Steering System
- 7.1 Warnings and Notices
- 7.1.1 Warnings and Notices
- 7.2 Hydraulic Power Steering System
- 7.2.1 Specifications
- 7.2.1.1 Fastener Tightening Specifications
- 7.2.1.2 General Specifications
- 7.2.2 Description and Operation
- 7.2.2.1 Description and Operation
- 7.2.3 System Working Principle
- 7.2.3.1 Hydraulic Power Rack and Pinion Steering Working Principle
- 7.2.3.2 Power Steering Pump Assembly Working Principle
- 7.2.4 Component Locator
- 7.2.4.1 Component Locator
- 7.2.5 Disassemble View
- 7.2.5.1 Disassemble View
- 7.2.5.2 Steering Disassemble View
- 7.2.5.3 Power Steering Pump Assembly Disassemble View
- 7.2.6 Schematic
- 7.2.6.1 Schematic
- 7.2.7 Diagnostic Information and Procedures
- 7.2.7.1 Diagnosis Description
- 7.2.7.2 Visual Inspection
- 7.2.7.3 Fault Symptom Table
- 7.2.8 Removal and Installation
- 7.2.8.1 Drive Belt Inspection
- 7.2.8.2 Power Steering Fluid Level Inspection
- 7.2.8.3 Steering Fluid Pressure Inspection
- 7.2.8.4 rower Steering Effort Check
- 7.2.8.5 Steering Tie Rod Ball Joint Inspection
- 7.2.8.6 Power Steering Outlet Pipe Replacement
- 7.2.8.7 Power Steering System Bleeding
- 7.2.8.8 Check Power Steering Fluid
- 7.2.8.9 Power Steering Pipe Assembly with Fluid Reservoir Replacement
- 7.2.8.10 Power Steering Pump Assembly Replacement
- 7.2.8.11 Steering Bar and Ball Joint Replacement
- 7.2.8.12 Power Steering Dust Cover Replacement
- 7.2.8.13 Power Steering Gear Assembly Replacement
- 7.3 Steering Wheel and Steering Column
- 7.3.1 Specifications
- 7.3.1.1 Fastener Tightening Specifications
- 7.3.2 Description and Operation
- 7.3.2.1 Description and Operation
- 7.3.3 Component Locator
- 7.3.3.1 Component Locator
- 7.3.4 Disassemble View
- 7.3.4.1 Disassemble View
- 7.3.5 Diagnostic Information and Procedures
- 7.3.5.1 Diagnosis Description
- 7.3.5.2 Visual Inspection
- 7.3.5.3 Fault Symptom Table
- 7.3.6 Removal and Installation
- 7.3.6.1 Steering Wheel Free Space Check
- 7.3.6.2 Upper and Lower Intermediate Shaft Universal Joints Inspection
- 7.3.6.3 Steering Wheel Replacement
- 7.3.6.4 Mechanical Steering Column Assembly Replacement
PART FOUR ELECTRICAL EQUIPMENT
8 Heating, Ventilation and A/C System
- 8.1 Warnings and Notices
- 8.1.1 Warnings and Notices
- 8.2 Automatic Air-conditioning
- 8.2.1 Specifications
- 8.2.1.1 Fastener Tightening Specifications
- 8.2.1.2 Cooling System Parameters
- 8.2.1.3 System Capacity
- 8.2.1.4 Indoor / Outdoor Temperature Sensor Resistance Properties
- 8.2.2 Description and Operation
- 8.2.2.1 Description and Operation
- 8.2.3 System Working Principle
- 8.2.3.1 Air-conditioning Control Panel Features Description
- 8.2.3.2 Automatic Air-conditioning Working Principle
- 8.2.4 Component Locator
- 8.2.4.1 Air-conditioning System Component Component Locator
- 8.2.4.2 Air-conditioning Assembly Component Locator
- 8.2.4.3 Air-conditioning Panel Diagram
- 8.2.5 Disassemble View
- 8.2.5.1 Disassemble View
- 8.2.6 Schematic
- 8.2.6.1 Air-conditioning Control System Schematic
- 8.2.6.2 Air-conditioning System Circuit Schematic
- 8.2.7 Diagnostic Information and Procedures
- 8.2.7.1 Diagnosis Description
- 8.2.7.2 Visual Inspection
- 8.2.7.3 Air-conditioning Control Module Terminal List
- 8.2.7.4 Data Stream List
- 8.2.7.5 DTC Code Table
- 8.2.7.6 Air-conditioning Clutch Inoperative
- 8.2.7.7 Air-conditioning Blower Inoperative
- 8.2.7.8 Insufficient Cooling
- 8.2.7.9 Insufficient Heating
- 8.2.7.10 Air-conditioning Refrigerant Recovery and Filling
- 8.2.8 Removal and Installation
- 8.2.8.1 Air-conditioning Control Panel Replacement
- 8.2.8.2 Air-conditioning Pipe Replacement
- 8.2.8.3 Air-conditioning Pressure Switch Replacement
- 8.2.8.4 Air Filter Replacement
- 8.2.8.5 Air-conditioning Assembly Replacement
- 8.2.8.6 Expansion Valve Replacement
- 8.2.8.7 Air-conditioning Compressor Replacement
- 8.2.8.8 Blower Speed Control Module Replacement
- 8.2.8.9 Blower Motor Replacement
- 8.2.8.10 Warm and Cold Air Adjust Motor and Inside and Outside Circulation Motor Replacement
- 8.2.8.11 Instrument Panel Air Duct Replacement
- 8.2.8.12 Air-conditioning Ventilation Pipe Replacement
- 8.2.8.13 Heater Core Replacement
- 8.2.8.14 Evaporator Core Replacement
- 8.2.8.15 Condenser Replacement
- 8.2.8.16 Ambient and Sun Light Sensor Replacement
- 8.2.8.17 Outside Temperature Sensor Replacement
- 8.2.8.18 Inside Temperature Sensor Replacement
- 8.2.8.19 Evaporator Temperature Sensor and Heat Core Temperature Sensor Replacement
9 Safety Protection Device
- 9.1 Warnings and Notices
- 9.1.1 Warnings and Notices
- 9.2 Airbag System
- 9.2.1 Specifications
- 9.2.1.1 Fastener Tightening Specifications
- 9.2.2 Description and Operation
- 9.2.2.1 Description and Operation
- 9.2.3 System Working Principle
- 9.2.3.1 System Working Principle
- 9.2.4 Component Locator
- 9.2.4.1 Component Locator
- 9.2.5 Schematic
- 9.2.5.1 Schematic
- 9.2.6 Diagnostic Information and Procedures
- 9.2.6.1 Visual Inspection
- 9.2.6.2 Fault Diagnostic Code (DTC) Table
- 9.2.6.3 Scan toll and the vehicle can not communicate
- 9.2.6.4 Warning lamp Always On
- 9.2.6.5 SRS warning lamp always off
- 9.2.6.6 Relevant DTC Code Diagnostic
- 9.2.6.7 Airbag Control Module Terminal Table
- 9.2.7 Removal and Installation
- 9.2.7.1 Airbag Control Module Replacement
- 9.2.7.2 Driver Front Airbag Replacement
- 9.2.7.3 Clock Spring Replacement
- 9.2.7.4 Passenger Front Airbag Replacement
- 9.2.7.5 Curtain Airbag Replacement (If equipped)
- 9.2.7.6 Front Collision Sensor Replacement
- 9.2.7.7 Side Collision Sensor Replacement (If equipped)
- 9.2.7.8 Passenger Recognition Sensor Replacement
- 9.2.7.9 Side Airbag Replacement
- 9.3 Pretension Seat Belt System
- 9.3.1 Specifications
- 9.3.1.1 Fastener Tightening Specifications
- 9.3.2 Description and Operation
- 9.3.2.1 Description and Operation
- 9.3.3 System Working Principle
- 9.3.3.1 System Working Principle
- 9.3.4 Component Locator
- 9.3.4.1 Component Locator
- 9.3.5 Schematic
- 9.3.5.1 Schematic
- 9.3.6 Diagnostic Information and Procedures
- 9.3.6.1 Visual Inspection
- 9.3.6.2 Driver Seat Belt Warning Lamp Inoperative
- 9.3.6.3 Front Passenger Seat Belt Warning Lamp Malfunction
- 9.3.7 Removal and Installation
- 9.3.7.1 Front Seat Belt Buckle replacement
- 9.3.7.2 Rear Seat Belt Buckle Replacement
- 9.3.7.3 Front Seat Belt Retractor Replacement
- 9.3.7.4 Rear Seat Belt Retractor Replacement
- 9.3.7.5 Front Seat Belt Height Adjuster Replacement
10 Vehicle Control System
- 10.1 Warnings and Notices
- 10.1.1 Warnings and Notices
- 10.2 Computer / Integrated Systems
- 10.2.1 Specifications
- 10.2.1.1 Fastener Tightening Specifications
- 10.2.2 Description and Operation
- 10.2.2.1 Description and Operation
- 10.2.3 Component Locator
- 10.2.3.1 BCM Component Locator
- 10.2.4 Diagnostic Information and Procedures
- 10.2.4.1 BCM Terminal List
- 10.2.4.2 Fault Diagnosis Code (DTC) List
- 10.2.4.3 Data Stream Table
- 10.2.4.4 Configuration Information
- 10.2.4.5 Alarm Triggered Event Log
- 10.2.4.6 LIN Bus Modules Running Status (Window Express Down Function)
- 10.2.4.7 BCM Active Test and Special Features
- 10.2.4.8 Self-Diagnostic Test List
- 10.2.5 Removal and Installation
- 10.2.5.1 BCM replacement
- 10.3 Programming and Set Up
- 10.3.1 Programming and Set Up
11 Body Electric
- 11.1 Warnings and Notices
- 11.1.1 Warnings and Notices
- 11.2 Audio Entertainment System
- 11.2.1 Specifications
- 11.2.1.1 Fastener Tightening Specifications
- 11.2.2 Description and Operation
- 11.2.2.1 Description and Operation
- 11.2.3 System Working Principle
- 11.2.3.1 System Working Principle
- 11.2.4 Component Locator
- 11.2.4.1 Component Locator
- 11.2.5 Schematic
- 11.2.5.1 Schematic
- 11.2.6 Diagnostic Information and Procedures
- 11.2.6.1 Diagnosis Description
- 11.2.6.2 Visual Inspection
- 11.2.6.3 Radio Control Can Not Be Turned On
- 11.2.6.4 Radio Control Can Be Turned On But The Speakers Are Inoperative
- 11.2.7 Removal and Installation
- 11.2.7.1 Front Door Speaker Replacement
- 11.2.7.2 Radio Antenna Module Replacement
- 11.2.7.3 Rear Speaker Replacement
- 11.2.7.4 Rear Speaker Replacement (Hatchback)
- 11.2.7.5 Radio Control Replacement
- 11.3 Navigation
- 11.3.1 Specifications
- 11.3.1.1 Fastener Tightening Specifications
- 11.3.2 Description and Operation
- 11.3.2.1 Overview
- 11.3.2.2 GPS System Introduction
- 11.3.2.3 Function Expansion Introduction
- 11.3.3 System Working Principle
- 11.3.3.1 Navigation System Principle Diagram
- 11.3.3.2 GPS System Positioning Principle
- 11.3.3.3 Self-Navigation
- 11.3.3.4 Map Matching Techniques
- 11.3.4 Component Locator
- 11.3.4.1 Component Locator
- 11.3.5 Schematic
- 11.3.5.1 Schematic
- 11.3.6 Diagnostic Information and Procedures
- 11.3.6.1 Visual Inspection
- 11.3.6.2 System Diagnostics Description
- 11.3.6.3 Navigation Notice
- 11.3.6.4 Navigation Non-Fault Status, The Positioning Amendment
- 11.3.6.5 Navigation Host Terminal List
- 11.3.6.6 Navigation Common Fault Symptom Table
- 11.3.6.7 Navigation Unit Can Not Be Turned On
- 11.3.6.8 Navigation Host Can Boot But Can Not Enter The Navigation Interface
- 11.3.6.9 Navigation Interface Can Be Accessed, But The Navigation Satellite Signals Can Not Be Retrieved.
- 11.3.6.10 Navigation Unit Can Not Be Turned Off
- 11.3.6.11 Navigation Normal Boot But The Speakers Inoperative
- 11.3.6.12 Navigation Panel Background Light Is Not On When The Park Lamps Are On.
- 11.3.6.13 The Screen Is Not Dimmed When The Park Lamps Are On
- 11.3.7 Removal and Installation
- 11.3.7.1 GPS Antenna Replacement
- 11.3.7.2 Speaker Replacement
- 11.3.7.3 Radio Antenna Module and Antenna Replacement
- 11.3.7.4 Navigation Unit Replacement
- 11.4 Lighting System
- 11.4.1 Specifications
- 11.4.1.1 Lamp Specifications (Sedan)
- 11.4.1.2 Lamp Specifications (Hatchback)
- 11.4.1.3 Fastener Tightening Specifications (Sedan)
- 11.4.1.4 Fastener Tightening Specifications (Hatchback)
- 11.4.2 Description and Operation
- 11.4.2.1 Exterior Lighting Description and Operation
- 11.4.2.2 Interior Lighting Description and Operation
- 11.4.2.3 Comfortable Lighting Control
- 11.4.3 System Working Principle
- 11.4.3.1 System Working Principle
- 11.4.4 Component Locator
- 11.4.4.1 Component Locator
- 11.4.5 Disassemble View
- 11.4.5.1 Disassemble View
- 11.4.6 Schematic
- 11.4.6.1 Schematic
- 11.4.7 Diagnostic Information and Procedures
- 11.4.7.1 Diagnosis Description
- 11.4.7.2 Visual Inspection
- 11.4.7.3 Headlamp Inoperative
- 11.4.7.4 High Beam Inoperative
- 11.4.7.5 Park Lamp Inoperative
- 11.4.7.6 Front Fog Lamp Inoperative
- 11.4.7.7 Rear Fog Lamp Inoperative
- 11.4.7.8 Brake Lamp Inoperative
- 11.4.7.9 Reverse Lamp Inoperative
- 11.4.7.10 Courtesy Lamp Inoperative
- 11.4.7.11 Rear Compartment Lamp Inoperative
- 11.4.8 Removal and Installation
- 11.4.8.1 Headlamp Switch Replacement
- 11.4.8.2 Fog Lamp Switch Replacement
- 11.4.8.3 Vanity Mirror Lamp Replacement
- 11.4.8.4 Dome Lamp and Reading Lamp Replacement
- 11.4.8.5 Rear Compartment Lamp (Hatchback Lamp) Replacement
- 11.4.8.6 Glove Box Lamp Replacement
- 11.4.8.7 Front Fog Lamp Replacement
- 11.4.8.8 Rear Fog Lamp Replacement (Sedan)
- 11.4.8.9 High Mounted Brake Lamp Replacement (Sedan)
- 11.4.8.10 High Mounted Brake Lamp Replacement (Hatchback)
- 11.4.8.11 Headlamp Replacement
- 11.4.8.12 Tail Lamp Replacement (Sedan)
- 11.4.8.13 Tail Lamp Replacement (Hatchback)
- 11.4.8.14 License Plate Lamp Replacement
- 11.4.8.15 Door Lamp Replacement
- 11.4.8.16 Reverse Switch Replacement
- 11.4.8.17 Brake Lamp Switch Replacement
- 11.4.8.18 Turn Signal Lamp Replacement
- 11.4.8.19 Instrument Background Light Adjustment Switch and Headlamp Height Adjustment Switch Replacement
- 11.4.8.20 Ambient and Sun Light Sensor Replacement
- 11.5 Glasses / Windows / Mirrors
- 11.5.1 Specifications
- 11.5.1.1 Fastener Tightening Specifications
- 11.5.2 Description and Operation
- 11.5.2.1 Description and Operation
- 11.5.3 System Working Principle
- 11.5.3.1 Power Management
- 11.5.3.2 Functional Timing Diagram
- 11.5.3.3 Power Window Relay Time Control
- 11.5.3.4 Mode
- 11.5.4 Component Locator
- 11.5.4.1 Component Locator
- 11.5.5 Disassemble View
- 11.5.5.1 Disassemble View
- 11.5.6 Schematic
- 11.5.6.1 Schematic
- 11.5.7 Diagnostic Information and Procedures
- 11.5.7.1 Diagnosis Description
- 11.5.7.2 Visual Inspection
- 11.5.7.3 Control Module Diagnostic Information
- 11.5.7.4 Glass Regulator Initialization (If Window Express Down Feature Is Available)
- 11.5.7.5 Window Regulator Control Module Terminal List (Without The Express Down)
- 11.5.7.6 All Electric Windows Inoperative (Without Window Express Down Function)
- 11.5.7.7 Left Front Window Regulator Inoperative (Without Window Express Down Function)
- 11.5.7.8 Window Regulator Inoperative (With Window Express Down Function)
- 11.5.7.9 Electric Rearview Mirror Can Not Be Adjusted
- 11.5.7.10 Electric Rearview Mirror Can Not Be Heated
- 11.5.8 Removal and Installation
- 11.5.8.1 Outside Rearview Mirror Replacement
- 11.5.8.2 Inside Rearview Mirror Replacement
- 11.5.8.3 Left Front Window Regulator Motor Replacement
- 11.5.8.4 Left Front Window Switch Replacement
- 11.5.8.5 Electric Outside Rearview Mirror Adjust Motor Replacement
- 11.5.8.6 Front Door Window Regulator Replacement
- 11.5.8.7 Rear Window Regulator Replacement
- 11.5.8.8 Window Regulator Module Replacement (If equipped)
- 11.5.8.9 Windshield Replacement
- 11.5.8.10 Rear Window Replacement (Sedan)
- 11.5.8.11 Rear Window Replacement (Hatchback)
- 11.6 Wipers / Washers System
- 11.6.1 Specifications
- 11.6.1.1 Fastener Tightening Specifications
- 11.6.2 Description and Operation
- 11.6.2.1 Description and Operation
- 11.6.3 System Working Principle
- 11.6.3.1 System Working Principle
- 11.6.4 Component Locator
- 11.6.4.1 Component Locator
- 11.6.5 Disassemble View
- 11.6.5.1 Disassemble View
- 11.6.6 Schematic
- 11.6.6.1 Schematic
- 11.6.7 Diagnostic Information and Procedures
- 11.6.7.1 Diagnosis Description
- 11.6.7.2 Visual Inspection
- 11.6.7.3 Wiper Inoperative At All Speed
- 11.6.7.4 Wiper Inoperative At High Speed
- 11.6.7.5 Wiper Inoperative At Low Speed
- 11.6.7.6 Wiper Inoperative At Intermittent
- 11.6.7.7 Front Washer Inoperative
- 11.6.7.8 Rear Window Wipers Inoperative (Hatchback)
- 11.6.7.9 Rear Washer Inoperative (Hatchback)
- 11.6.8 Removal and Installation
- 11.6.8.1 Wiper Blade Replacement
- 11.6.8.2 Wiper Arm Replacement
- 11.6.8.3 Rear Wiper Arm Replacement (Hatchback)
- 11.6.8.4 Wiper Nozzle Replacement
- 11.6.8.5 Rear Wiper Nozzle Replacement (Hatchback)
- 11.6.8.6 Washer Motor and Hose Replacement
- 11.6.8.7 Washer Fluid Tank Replacement
- 11.6.8.8 Wiper and Washer Switch Replacement
- 11.6.8.9 Wiper Motor Replacement
- 11.6.8.10 Rear Washer Pump and Hose Replacement (Hatchback)
- 11.6.8.11 Rear Wiper Motor Replacement (Hatchback)
- 11.7 Instrument / Driver Information System
- 11.7.1 Specifications
- 11.7.1.1 Fastener Tightening Specifications
- 11.7.1.2 Indicator Descriptions
- 11.7.2 Description and Operation
- 11.7.2.1 Display
- 11.7.2.2 Odometer Display Mode Switch
- 11.7.3 System Working Principle
- 11.7.3.1 System Working Principle
- 11.7.4 Component Locator
- 11.7.4.1 Component Locator
- 11.7.5 Schematic
- 11.7.5.1 Schematic
- 11.7.6 Diagnostic Information and Procedures
- 11.7.6.1 Diagnosis Description
- 11.7.6.2 Visual Inspection
- 11.7.6.3 Fault Diagnostic Code (DTC) List
- 11.7.6.4 Instrument Active Test List
- 11.7.6.5 Meter Terminal List
- 11.7.6.6 DTC U1303 U1304
- 11.7.6.7 DTC U129C U129D
- 11.7.6.8 DTC U150F
- 11.7.6.9 DTC U1400 U1410 U1420 U1430 U1501 U1601
- 11.7.7 Removal and Installation
- 11.7.7.1 Instrument Cluster Replacement
- 11.8 Sunroof
- 11.8.1 Specifications
- 11.8.1.1 Fastener Tightening Specifications
- 11.8.1.2 Sunroof Motor Specification
- 11.8.2 Description and Operation
- 11.8.2.1 Description and Operation
- 11.8.3 System Working Principle
- 11.8.3.1 System Working Principle
- 11.8.4 Component Locator
- 11.8.4.1 Component Locator
- 11.8.5 Disassemble View
- 11.8.5.1 Disassemble View
- 11.8.6 Schematic
- 11.8.6.1 Schematic
- 11.8.7 Diagnostic Information and Procedures
- 11.8.7.1 Diagnosis Description
- 11.8.7.2 Visual Inspection
- 11.8.7.3 Sunroof Initialization
- 11.8.7.4 Sunroof Inoperative
- 11.8.7.5 Sunroof Can Not Open
- 11.8.7.6 Sunroof Can Not Close
- 11.8.7.7 Sunroof Anti-trap Function Inoperative
- 11.8.7.8 Sunroof Can Not Operate Intermittently
- 11.8.8 Removal and Installation
- 11.8.8.1 Sunroof Glass Replacement
- 11.8.8.2 Sunroof Motor Replacement
- 11.8.8.3 Sunroof Switch Assembly Replacement
- 11.8.8.4 Sunroof Frame Replacement
- 11.8.8.5 Sunroof Visor Replacement
- 11.9 Central Locking
- 11.9.1 Specifications
- 11.9.1.1 Fasteners Tightening Specifications
- 11.9.2 Description and Operation
- 11.9.2.1 Description and Operation
- 11.9.3 System Working Principle
- 11.9.3.1 System Working Principle
- 11.9.4 Component Locator
- 11.9.4.1 Component Locator
- 11.9.5 Disassemble View
- 11.9.5.1 Disassemble View
- 11.9.6 Schematic
- 11.9.6.1 Schematic
- 11.9.7 Diagnostic Information and Procedures
- 11.9.7.1 Diagnosis Description
- 11.9.7.2 Visual Inspection
- 11.9.7.3 Symptom List
- 11.9.7.4 Mechanical Key / Central Locking Switch Can Not Lock All Doors
- 11.9.7.5 Mechanical key / Central Locking Switch Can Not Unlock All Doors
- 11.9.7.6 Super Locking Inoperative
- 11.9.7.7 Rear Compartment Lid Can Not Be Opened (Sedan)
- 11.9.7.8 Doors Automatically Lock (20 km/h) Inoperative
- 11.9.7.9 Vehicle Door Lock Operated During Driving
- 11.9.7.10 Left Front Door Lock Inoperative
- 11.9.7.11 Right Front Door Lock Inoperative, Left Rear Door Lock Inoperative, Right Rear Door Lock Inoperative
- 11.9.8 Removal and Installation
- 11.9.8.1 Left Front Door Lock Assembly Replacement
- 11.9.8.2 Rear Door Lock Block Replacement
- 11.9.8.3 Hatchback Lock Assembly Replacement (Hatchback)
- 11.9.8.4 Rear Compartment Lock Assembly Replacement (Sedan)
- 11.9.8.5 Rear Compartment Lid Release Switch Replacement
- 11.10 Remote Anti-theft System
- 11.10.1 Specifications
- 11.10.1.1 Fastener Tightening Specifications
- 11.10.2 Description and Operation
- 11.10.2.1 Description and Operation
- 11.10.3 System Working Principle
- 11.10.3.1 System Working Principle
- 11.10.4 Component Locator
- 11.10.4.1 Component Locator
- 11.10.5 Disassemble View
- 11.10.5.1 Remote Key
- 11.10.6 Schematic
- 11.10.6.1 Schematic
- 11.10.7 Diagnostic Information and Procedures
- 11.10.7.1 Diagnosis Description
- 11.10.7.2 Visual Inspection
- 11.10.7.3 Remote Control Inoperative
- 11.10.7.4 Symptom Table
- 11.10.7.5 Anti-theft Indicator Inoperative
- 11.10.7.6 Anti-theft Horn Inoperative
- 11.10.8 Removal and Installation
- 11.10.8.1 BCM Replacement
- 11.10.8.2 Anti-theft Indicator Lamp Replacement
- 11.10.8.3 Anti-theft Horn Replacement
- 11.10.8.4 Hood Ajar Switch Replacement
- 11.10.8.5 Remote Control Emitter Battery Replacement
- 11.11 Electric Seats
- 11.11.1 Specifications
- 11.11.1.1 Fastener Tightening Specifications
- 11.11.2 Description and Operation
- 11.11.2.1 Description and Operation
- 11.11.3 System Working Principle
- 11.11.3.1 System Working Principle
- 11.11.4 Component Locator
- 11.11.4.1 Component Locator
- 11.11.5 Disassemble View
- 11.11.5.1 Disassemble View
- 11.11.6 Schematic
- 11.11.6.1 Schematic
- 11.11.7 Diagnostic Information and Procedures
- 11.11.7.1 Diagnosis Description
- 11.11.7.2 Visual Inspection
- 11.11.7.3 Electric Seat Can Not Be Adjusted Forward and Rearward
- 11.11.7.4 Electric Seat Height Can Not Be Adjusted
- 11.11.7.5 Electric Seat Back Can Not Be Adjusted
- 11.11.7.6 Left Front Electric Seat Can Not Be Heated
- 11.11.8 Removal and Installation
- 11.11.8.1 Front Electric Seat Replacement
- 11.11.8.2 Seat Side Trim Panel Replacement
- 11.11.8.3 Electric Seat Back Adjustment Motor Replacement
- 11.11.8.4 Electric Seat Back Replacement
- 11.11.8.5 Front Seat Lumbar Support Knob Replacement
- 11.11.8.6 Electric Seat Cushion Replacement
- 11.11.8.7 Seat Heating Switch Replacement
- 11.11.8.8 Electric Seat Frame Assembly Replacement
- 11.11.8.9 Electric Seat Adjustment Switch Replacement
- 11.12 Defrosting
- 11.12.1 Specifications
- 11.12.1.1 Defroster Working Condition Requirements
- 11.12.2 Description and Operation
- 11.12.2.1 Description and Operation
- 11.12.3 System Working Principle
- 11.12.3.1 Working Principle
- 11.12.4 Component Locator
- 11.12.4.1 Component Locator
- 11.12.5 Schematic
- 11.12.5.1 Schematic
- 11.12.6 Diagnostic Information and Procedures
- 11.12.6.1 Diagnosis Description
- 11.12.6.2 Visual Inspection
- 11.12.6.3 Rear Window Defroster Inoperative
- 11.12.6.4 Electric Rearview Mirror Defroster Inoperative
- 11.12.7 Removal and Installation
- 11.12.7.1 Rear Window Defrost Grille Replacement
- 11.12.7.2 Electric Rearview Mirror Heater Replacement
- 11.12.7.3 Rear Window Defrost Switch Replacement
- 11.12.7.4 Rear Window Defroster Lead Repair
- 11.13 Horn
- 11.13.1 Specifications
- 11.13.1.1 Fastener Tightening Specifications
- 11.13.1.2 Speaker Specifications
- 11.13.2 Description and Operation
- 11.13.2.1 Description and Operation
- 11.13.3 System Working Principle
- 11.13.3.1 System Working Principle
- 11.13.4 Component Locator
- 11.13.4.1 Component Locator
- 11.13.5 Disassemble View
- 11.13.5.1 Disassemble View
- 11.13.6 Schematic
- 11.13.6.1 Schematic
- 11.13.7 Diagnostic Information and Procedures
- 11.13.7.1 Diagnosis Description
- 11.13.7.2 Visual Inspection
- 11.13.7.3 Horn Switch Contact Adjustment
- 11.13.7.4 Horn Inoperative
- 11.13.8 Removal and Installation
- 11.13.8.1 Horn Replacement
- 11.14 Reverse Radar
- 11.14.1 Specifications
- 11.14.1.1 Fastener Tightening Specifications
- 11.14.2 Description and Operation
- 11.14.2.1 Description and Operation
- 11.14.2.2 Alert Tone Level
- 11.14.2.3 Detection Area
- 11.14.3 System Working Principle
- 11.14.3.1 Reverse Radar Control Unit Functions
- 11.14.3.2 Sensor-Driven Sequence
- 11.14.3.3 Reverse Radar Display
- 11.14.3.4 Buzzer Driver
- 11.14.4 Component Locator
- 11.14.4.1 Component Locator
- 11.14.5 Schematic
- 11.14.5.1 Schematic
- 11.14.5.2 Reverse Radar Control Module Terminal List
- 11.14.6 Diagnostic Information and Procedures
- 11.14.6.1 Diagnosis Description
- 11.14.6.2 Visual Inspection
- 11.14.6.3 Sensor Malfunction Diagnostic
- 11.14.6.4 The System May Not Work Properly Because
- 11.14.6.5 The Sensor Detecting Ability May Drop Because
- 11.14.6.6 The False Alarm May Be Triggered Because
- 11.14.6.7 The System Can Not Detect The Following Objects
- 11.14.6.8 Possible Scenarios
- 11.14.6.9 Fault Symptom List
- 11.14.6.10 System Unable to Self-test (Buzzer Did Not Ring)
- 11.14.6.11 Buzzer Continuously Ring with Gear at R
- 11.14.6.12 Self-test Right Corner Sensor Malfunction
- 11.14.6.13 Self-test Right Middle Sensor Malfunction
- 11.14.6.14 Self-test Left Middle Sensor Malfunction
- 11.14.6.15 Self-test Left Corner Sensor Malfunction
- 11.14.7 Removal and Installation
- 11.14.7.1 Reverse Radar Module Replacement
- 11.14.7.2 Reverse Radar Sensor Replacement

AND MORE...