Citroën GS - Multilanguage Workshop Manual (English, Español)

CITROËN GS  - MANUAL DE TALLER - SERVICE MANUAL


- Manual de Taller en español, para el Citroën GS

- English Workshop Manual, to Citroën GS



INDICE

VERSIONES

- CITROEN GS
- CITROEN GS-CLUB
- CITROEN GS-PALAS
- CITROEN GS-BREAK
- CITROEN GS-X2


MANUAL DE REPARACIONES:


CARACTERÍSTICAS TÉCNICAS

Motor
Distribución
Alimentación
Lubricación
Refrigeración
Embrague
Cambio de velocidades
Diferencial
Dirección
Sistema hidráulico
Suspensión anterior
Suspensión posterior
Frenos
Dimensiones
Llantas y neumáticos
Abastecimientos y pesos
Equipo eléctrico
Dispositivo calefacción adicional
Esquema eléctrico calefacción adicional
Instalación eléctrica

USO Y ENTRETENIMIENTO

El rodaje
Cuidados a la batería
Cuidados a la alimentación
Atenciones al encendido
Atenciones a la lubricación
Atenciones a la distribución
Atenciones a la transmisión
Atenciones a los frenos
Atenciones a la dirección y a las ruedas
Atenciones a los faros
Suspensión hidroneumática

AVERIAS Y SOLUCIONES

Utillaje
El motor no arranca
El motor se para
Al motor le falta potencia
El motor funciona irregularmente
El motor falla a altas velocidades
El motor falla al pasar de alta a baja
El cigüeñal golpetea
Rumorosidad de las bielas
Rumorosidad de pistones y bulones
Rumorosidad de válvulas
Vibraciones propias del conjunto motor
Baja presión de aceite en el motor
Excesiva presión de aceite en el motor
Ruido al apretar el pedal del embrague
El embrague patina
Ruidos al soltar el pedal del embrague
El embrague no desembraga
Anormal desgaste de los forros del disco
Ruido en el cambio
Las velocidades entran con dificultad
Las marchas se salen espontáneamente
Pérdida de aceite en la caja de cambios
Golpeteo en la dirección
La dirección tira a un lado
Acción elástica del pedal del freno
Carrera excesiva del pedal del freno
Frenado desequilibrado
La suspensión está dura
La suspensión está suave
Suspensión inestable
La suspensión es ruidosa
El indicador de carga se apaga a altas velocidades
Indicador de carga no se apaga
El motor de arranque no gira
Averías de los neumáticos

TRUCAJE

Consideraciones generales
La relación de compresión
Aumento de cilindrada y relación de compresión
Preparación de la culata
Preparación de válvulas y sus asientos
Trucaje de los pistones
Trucaje del árbol de levas
Mejoramiento de la carburación
Aligerado de peso de piezas móviles y equilibrado
Muelles de válvulas


Manual en español de aprox. 120 páginas con multitud de ilustraciones.




INDEX REPAIR MANUAL (487 pages):


CHARACTERISTICS ADJUSTEMENTS CHECKS

CHARACTERISTICS
General characteristics of the «1015 Saloon»
General characteristics of the «1220 Saloon»
General characteristics of the «1015 Estate»
General characteristics of the «1220 Estate»
Fitting a roof rack
External and internal dimensions (Saloon)
External and internal dimensions (Estate)
External and internal dimensions (Service Van, Metal Sided)
External and internal dimensions (Service Van, Glass Sided)
Fitting the monograms
Protection of the electrical units
Precautions during the fitting of hydraulic components
Recommended materials
ENGINE - CARBURATION - IGNITION
Technical data and special features of the engine
Checking and setting the rockers
Checking and adjusting the valve timing
Characteristics and special features of the carburettors ( G. 10 engine   1015 ce)
Characteristics and special features of the carburettor ( G. 103 engine - 1220 ce)
Checking and setting the carburettor ( G. 10 engine - 1015 ce)
Checking and setting the carburettor ( G, 10 engine - 1220 ce)
Checking of the preheating of the air intake
Checking of the thermostatic sensor
Characteristics and checks of the fuel system (fuel pump and filter)
Characteristics and special features of the ignition system ( G. 10 engine 1015 ce)
Distributor, coil, sparking plugs, wiring
Characteristics and special features of the ignition system ( G. 103 engine 1220 ce)
Checking and adjusting the ignition Checking and adjusting the oil pressure
CLUTCH
Characteristics and special features of the clutch
Checking and adjusting the clutch control
Characteristics and special features of the torque converter
Checking and adjusting the torque converter and its controls
Checking and adjusting the control contacts of the declutching system
Checking the pressure of the fluid circuit of the torque converter
GEARBOX
Characteristics and special features of the 4 speed gearbox
Characteristics and special features of the 3 speed gearbox
Oil draining and filling of the gearbox and converter DRIVE SHAFTS
Characteristics and special features of the drive shafts
HYDRAULIC SOURCE AND RESERVE OF PRESSURE
Characteristics and special features of the source of pressure
General hydraulic circuit
Checking the hydraulic units on the car
FRONT AXLE
Characteristics and special features of the front axle
Checking and adjusting the front axle
REAR AXLE
Characteristics and special features of the rear axle
Checking and adjusting the rear axle
SUSPENSION
Characteristics and special features of the suspension
Checking and adjusting the suspension and its controls
Lubrication of the balls of the suspension push-rods
Adjustment of the end-float of the anti-roll bar
STEERING
Characteristics and special features of the steering
Checking and adjusting the steering
Characteristics and special features of the braking system
Checking the components of the braking system
Checking and adjusting the control of the main braking system
Bleeding the braking system
Checking and adjusting the hand brake system
ELECTRICAL SYSTEM
Arrangement of the electrical installation (« French Market» vehicles introduced until July 1973)
Arrangement of the electrical installation («French Market» vehicles introduced since July 1973)
Arrangement of the electrical installation («Export» vehicles - All countries)
Arrangement of the electrical installation ( R.H.D. vehicles introduced since March 1971 )
Arrangement of the electrical installation («Export» vehicles with specifications for NORWAY)
Arrangement of the electrical installation («Export» vehicles with specifications for GERMANY,
BELGIUM, NETHERLANDS)
Arrangement of the electrical installation («Export» vehicles with specifications for DENMARK)
Characteristics and checking of the electrical equipment
Checking and adjusting the headlamps
Checking and adjusting the windscreen wipers
Checking and repair of a rear window heater element
BODY
Fitting a roofrack
External and internal dimensions (Saloon)
External and internal dimensions (Estate)
Adjustment of the components of the bodywork
Adjustment of the front and rear side doors
Adjustment of rear boot lid
Adjustment of bonnet
TOOLS
List of tools mentioned in the volume
Manufacturing drawings for tools not sold

    
REMOVAL AND FITTING

ENGINE - CARBURATION - IGNITION
Removing and fitting an engine-gearbox assembly
Removing and fitting an engine only Work on cylinder heads :
- Removing and fitting a rocker shaft or a rocker arm ( on the vehicle )
Work on the timing :
- Removing and fitting a driving belt, a tensioner or a timing gear
- Removing and fitting a camshaft
Work on the oil pump :
- Removing and fitting a pump drive ( or seal ) or an oil pump ( on the vehicle )
GEARBOX
Stripping down and assembling a four-speed gearbox Work on the gear change :
- Removing and fitting the gear lever
- Removing and fitting the linkages Work on gearbox drive outlet
- Removing and fitting a differential shaft, a bearing or a seal
HIGH PRESSURE PUMP AND RESERVOIR
Removing and fitting a high pressure pump
FRONT AXLE
Work on the front suspension:
- Removing and fitting an upper suspension arm
- Removing and fitting a lower suspension arm
Work on the swivel
- Removing and fitting a complete swivel assembly or a ball joint
- Removing and fitting the bearing, seáis or hub
Removing and fitting the front axle unit for exchange
REAR AXLE
Removing and fitting a rear suspension arm
Work on the rear suspension arm
- Removing and fitting bearings, a seal or a friction washer
Work on the rear wheel hub:
- Removing and fitting a brake disc, a hub or a bearing
Replacing the rear axle unit
Replacing a suspension arm support tube


RECONDITIONING

ENGINE
Overhauling an engine
Stripping down and assembling an engine
Repair of a cylinder head
GEARBOX
Stripping down and assembling a gearbox (mechanical clutch)
Repair of a four-speed gearbox
Repair of a three-speed gearbox (torque converter)
TOOLS
List of special tools
Manufacturing drawings for tools not sold


ELECTRICAL SYSTEM

ELECTRICAL SYSTEM
Work on the alternator
- PARIS-RHONE alternators
- DUCELLIER alternators
Work on a starter motor
- DUCELLIER starter motor
- PARIS-RHONE starter motor


BODYWORK

BODYWORK
Body preparation
- Sealing with' sealing compound
- Soundproofing Checking the body
BODY PANEL WORK
Work on the side windows
- Replacing a side window Work on the rear window
- Replacement of the rear window Work on the rear tailgate
- Replacement of a « bonded » tailgate window
- Replacement of a « set-in » tailgate window

BUY HERE